For a few days the media was pushing the story that the shooting damage to three power substations in Moore County, North Carolina was anti LGBT terrorism to shut down a drag show.

I didn’t believe that.  I said I thought it was either vandalism or a Leftist false flag attack.

Seems I was right.

Five electricity substations in Oregon and Washington are attacked just days after two in North Carolina were shot up causing widespread power outages

At least five attacks at electricity substations in the Pacific Northwest have been reported to the FBI in recent weeks.

The incidents came to light via a federal memo following a deliberate attack last week in Moore County, North Carolina, that left tens of thousands of people without power for days as seasonal temperatures fall.

In Washington state and Oregon, spokespeople for several energy companies – Puget Sound Energy, the Cowlitz County Public Utilities District and Bonneville Power Administration – confirmed the attacks occurred in November.

A federal law enforcement memo revealed that the Pacific Northwest substations have described attacks using ‘handtools, arson, firearms, and metal chains possibly in response to an online call for attacks on critical infrastructure.’

‘In recent attacks, criminal actors bypassed security fences by cutting the fence links, lighting nearby fires, shooting equipment from a distance or throwing objects over the fence and on to equipment,’ read the memo.

The US Department of Homeland Security Office of Intelligence and Analysis warned early this year that domestic extremists ‘have developed credible, specific plans to attack electricity infrastructure since at least 2020.’

So we had multiple attacks and credible threats of attacks but they never hit the news until Blue-anon could tie one to a drag show.

Clearly our grid is more vulnerable than we believe and bad actors are taking advantage of that.

Now my suspicion is that these attacks are carried out by anti-America Leftists.

That’s usually the case when the federal government and media go dark on stories of terrorism.

Also the Pacific Northwest is a known hotbed of Leftism and Leftist environmentalist terrorism.

I may be wrong, but the evidence points in the direction of it being the Left who is engaged in infrastructure terrorism and the media tried to pass it off as anti-gay Right Wing terrorism.

Don’t forget to donate to Wreaths Across America and if you can, join and help laying wreaths at your local cemetery. I’ll be helping laying wreaths on Dec 17 at Stones River National Battlefield, 3501 Old Nashville Hwy, Murfreesboro, TN 37129, United States. 11 AM is the time and if you are in the area, come join me.

The saying is “two is one, one is none.” The idea being that if you only have one of something and it breaks you are no shit out of luck.

If you have two of something and one breaks you still have the other and can keep on going. More importantly, you now have a parts thing to be able to repair your second thing.

It also turns out that I like having rifles in pistol calibers with a pistol to match. Which is why I have a Ruger PC-9.

As part of my prep I figured that there might come a time when it was hard or impossible to get smokeless powder. I know how to make black powder. I know how to create the right type of black powder for pistol or rifle loads. This lead to my first rifle/pistol purchase. A Marlin lever action in .45Colt and a Pietta SAA in .45 Colt.

I like both, they are fun to shoot. The only issue I’ve ever had with them was rounds that had bad primer seating. This lead to failure to fire in .45 Colt and .45ACP. My first squib. And it was good to see that I caught it and knew what it was.

Then I ended up in the situation of having a bunch of 30-30 brass and nothing to use it with. This lead to a Model 1896 Winchester (pre ’64) in 30-30 WCF. Which lead to another Model 1896 (’64) in 30-30 WCF. Which lead to a Merlin in 30-30 Win. Which lead to another Model 1896 (Pre ’64) in 30-30 WCF.

Then my daughter fell in love with a Springfield Trapdoor in 45-70. This lead to a Henry lever action in 45-70. Now that thing hits HARD.

While all of this was going on I found a want to shoot without losing brass. Brass is getting hard to get and my standard range has range officers that are on broom patrol. If they see brass on the ground they sweep it out into the lanes where it can’t be recovered by the shooter. On a good day I recover maybe 75% of my brass but on some days I consider myself lucky to recover 40%.

A revolver would allow me to retain all my brass. I decided to go with .357/.38SPL because I had .357 brass and the only other rimmed pistol caliber I had was .45 Colt.

Then the critter shoot of 2022 took place. 30-30 was a little too big and .22LR was too small. This elevated my desire for a lever action in .357 Magnum quite a bit. My LGS had a Rossi R92 in .357 Mag but it was ugly and I didn’t like the buckhorn sights.

I don’t know about the rest of you, but it is darn hard to drive past my LGS when I only get out that way once a month or so. I had gone to get my daughter’s car worked on and on the way back I stopped to take a look. Boy was I in luck.

They had a Rossi R92 from the 1990’s (I think) and the wood was beautiful. The finish was ok with only a little bit of wear. It had a U notch rear sight. It shouldered well and was just beautiful. It followed me home.

I got it home and took it out to the test range. The test range isn’t all that long but it allows me to test functionality of a firearm. Does it go bang when you press the trigger and does the steel ring?

Here I found “the” problem with the R92. When loading the last cartridge loaded doesn’t center in the receiver. Since it doesn’t center the lifter doesn’t popup and so you can’t chamber that round. You can reach down into the receiver and move the cartridge to the left and it will center correctly and then everything will function as designed.

When everything is working correctly, this is how it is suppose to look.

And for you all that are worried about safety, this is a dummy round. The primer is expended and there are a couple of BB’s in the case that rattle when you shake it. So visual and audible markings to let me know it is a dummy round.

Rossi firearms have a reputation for not being the best in terms of fit/finish/QA. This means that almost any part of the firearm that isn’t user visible is likely to be unfinished or not well finished. If you go online you will find many many stories of R92’s that have the cartridge hangup when you load the last round.

The standard issue is that the leading edge of the loading gate is “razor sharp”. The fix is to make it a bit flatter and make sure the case head doesn’t hang up there. So I took it apart.

Had to look this next part up. You need to use a thin wire to capture the main spring. I just use a paperclip. That paperclip now lives in the tool kit.

Once the main spring is captured you can remove the bolt/finger link pivot, the hammer pin/screw and remove the lower tang and hammer assembly.

John Brown loves his locking bars. These bars have a screw/pivot pin on one and a hole on the other. If you pull the finger lever out with the loading gate down you will have the lower locking bar fall off. If you are like me, that bar will then bounce off the nice mat and land on the floor, covered in gun oil it will collect anything that hasn’t been swept up.

There is a rabbet on the locking bars, this picture shows how they should line up.

With the locking bars and finger lever out of the way you can remove the lower tang and hammer assembly. Some people have noted that their R92 required them to backoff the lower tang (partially remove it) before they could remove the finger lever with attached locking bars.

When reassembling it is important to watch the trigger pin. It will sometimes slide downward and if it does the lower tang will not go into the receiver.

Now that the hammer is out of the way you can remove the bolt. The ejector is a real pain in the butt. It has a very heavy spring. It consists of three parts, the ejector itself, the ejector spring, and a small collar. The collar is caught on a finger in the bolt and the spring pushes against that. If you lose the collar your rifle is not going to be able to eject rounds.

The loading gate can now be removed by removing one screw.

Of course, having gotten this far I didn’t actually take the gate off. Regardless, the inside is all rough cast. For people that don’t understand, think of the outside surface of a new cast iron pan. It is very rough. Not quite at sandpaper levels but close.

On the inside of the gate is a ramp leading away from the leading edge. At the end of that ramp is a flat surface. ALL of those surfaces have to be polished so that the rim of the case doesn’t hang up on them.

Once I had done that cartridges no longer hung up on the loading gate. At least not as often. I’m going to have to go back in and readjust the geometry a little and some other stuff. Regardless, it is much better now and I’m looking forward to a little bit of dry so I can go run a dozen rounds through it to verify functionality. (And loads)

Putting the rifle back together is a pain in the ass. You need to be able to completely seat the bolt in order to get the pivot hole in the right place. The ejector spring is so hard it is almost impossible to push the bolt in that far by hand.

The answer is to use a dummy round OR an empty .357 case. A .38 SPL case is not long enough. You hook the rim under the extractor hook, lever it down against the ejector and its spring, slide the entire bolt into place until the mouth of the cartridge is chambered. Now you can fiddle the finger lever and the locking bars back into place.

Once it is close, carefully align the hole in the bolt with the hole in the finger lever and push the pivot pin back home. The surrations on the pivot pin go towards the removal hole. The first part of the insertion should be finger pressure. You should be able to get the pin flush with the side of the receiver with just finger pressure. If the pin is not going in, it means that the holes are not aligned. Play with the finger lever until the holes align.

Once the pivot pin is in place you need to use a punch to make sure it is fully seated. The gun will not operate if the pivot pin is not fully seated. The finger lever will jam/not move.

I do love my lever action rifles. They are a lot of fun to play with. They came in everything from .22LR up to a hard hitting 45-70. They come in different barrel lengths from light 16″ carbine lengths to longer 24″ rifles. Many can have scopes added to them, my 30-30 Marlin came with a scope. You can add peep sights with different adjustments. They are fast and versatile.

The downside is that they are complicated. Compared to an AR15 they have a monstress number of parts that you can lose. The amount of time it takes to get down to the point where you can clean them properly is a bit daunting. Screws come loose and have to be tightened as part of your preventative maintenance. It takes practice to be able to load them easily.

There is a limited set of angles that you can hold them in where they will function when cycling a round.

Still I’m looking for more. I want to add a .22LR to the collection.

Equipment used for photography:

Nikon D5100 (Used body purchased from B&H Photo), onboard flash, Nikon ED AF-S Nikkor 28-70mm 1:2.8 D. The lens is part of my kit back when I was doing film photography.

"I'm sorry that's happening to you. Best of luck."

Senator @TomCottonAR blasts woke Kroger CEO for expecting Republicans to come to their defense. pic.twitter.com/L9j82kDraA

— Townhall.com (@townhallcom) December 6, 2022

That is going to leave a well-deserved burn.

You know and I know that eventually a parent is going to lose it and kill one of these sick bastards. A big show will be made of prosecuting the parent and the only chance we have to reverse this sick trend will be for the jury to render a verdict of Not Guilty.

That should serve to scare the rest of the Child Molesters into keeping their shit to a minimum, especially if it becomes a trend.

And now that has brought a though: The Emmett Till Antilynching Act. Was that created for what reason? There has not been an uptick of lynchings of Blacks or any other races anywhere for several decades. And I believe that all states have some sort of provisions against lynching plus murder is murder and still against the law in the 50 states. Maybe Congress is afraid people will lose its shit and start using fellow groomers as telephone pole decorations, so they inject the fear of the power of the Federal government to defend them?

I am gonna say drugs were involved.

KNOX CO., Tenn. (WVLT) – Knox County Sheriff’s Office officials are investigating a shooting that occurred after a naked man had destroyed a home’s interior.

At around 9:00 p.m., officers responded to a home in the 7800 block of Westland Drive. KCSO officials said the man was violent.

He has been transported to the University of Tennessee Medical Center for at least one gunshot wound to the chest.

KCSO officials said he is in critical condition.

Naked man shot after destroying Knox Co. home, sheriff says (wvlt.tv)

Why do I have this mental image of a pissed off Southern wife looking at the mess and saying, “Oh no you didn’t!” before pulling the trigger?

Tyson’s law of social media: “Social media made y’all way to[o] comfortable with disrespecting people and not getting punched in the face for it.”

Today I found this gimmic account.

Your wife is the one bailing out of a moving car to throw things at us, sir.

Stickers: https://t.co/6xVMBxOrdl pic.twitter.com/hFaReN8rjE

— CartNarcs (@CartNarcs) December 7, 2022

Yes, I know that people who don’t put away their carts are annoying.

But…

This guy is not an employee of the store.

He’s a guy who is video recording people’s faces and license plates and posting them all over the internet to publicly shame people over thr petty bullshit of not putting away a Cary?

That dude needs to bite a concrete parking stop.

And yes, I will go one step further.

I believe that if you are not engaged in criminal activity and someone starts recording you, you should have every legal right to assault them and destroy their phone.

Internet hate mobs do untold amounts of damage to people’s lives over the pettiest of shit.

Decent people should be protected from that because some cockbag with a smartphone wants to get a million views.